Plastic Copy of Penis

For castration-related posts that just donโ€™t seem to fit anywhere else.
Post Reply
Farrell_Squire (imported)
Posts: 128
Joined: Wed Nov 28, 2001 3:28 am

Posting Rank

Plastic Copy of Penis

Post by Farrell_Squire (imported) »

This is essentially a repost of a question I asked back on the old message board. I received some good answers, but the board went down within 48 hours of the post and I lost all information. Since I see we have several new members, and they might be interested in this as well, I'll repost the following:

I have read quite a few stories on the archive where a man's severed penis is preserved by taxidermy and used as a dildo by his lover. This makes great fantasy, but in real life the practice would be very unhygienic. I'm not even too sure how the severed penis would respond to taxidermy. From most pictures I've seen, a severed penis is a rather pathetic-looking piece of flesh - probably best just to dispose of it. However, I want to relate a story that piqued my interest years ago.

Back in the early 1970's I was sitting in the waiting room of a dentist's office. Bored, I picked up one of those women's magazines that men would usually never look at (Redbook, I think). There was an article directed at women whose husbands were going to undergo penectomies for medical reasons.

One physician, reported success in helping couples cope with the husband's penectomy. His was a novel method, and required that the penectomy be planned in advance. He would have the husband make a plaster cast of the his erect penis before the operation. This cast would become the master mold from which a theoretically infinite number of plastic penises could be molded. It worked kind of like those plastic worm kits that fishermen use to mold their own plastic worms.

The article said that these plastic penises were very realistic and reproduced all the veins and skin ridges of the husband's original penis. Apparently, the doctor had been doing this for several years, and included quotes from several satisfied wives in his article. When the dildo finally became worn or dirty, all the couple had to do was cast another plastic penis from the mold.

Among the answers to my earlier post, I received urls of places that sold casting material for making casts of body extremities like hands and feet. From the casts, you can make plastic copies of hands, fingers, toes, etc. Presumably, this is mostly a novelty toy aimed at kids. (I wonder how many adults use this stuff to make casts of those "other" extremities?)

Anyway, if anyone still knows those urls for the plastic novelty kits, please be kind enough to repost here. This time I will try to save the material and give it a permanent home on my website and club.

Farrell
Bboy
Posts: 780
Joined: Tue May 15, 2001 1:04 am

Posting Rank

Re: Plastic Copy of Penis

Post by Bboy »

One good place to get the stuff cheap is called 'Michael's' and it's an arts and crafts store. They sell the stuff to make the mold of the penis, and they also sell stuff to reproduce it in ... well it's like plaster of paris I guess, except that once set it kind of had the feel and look of ceramic.

There are some websites that sell the complete kit including the plastic/rubber stuff to make it more like a conventional dildo.

URL's anyone? I don't have any off the top of my head but will do some research and post the results.
Dave (imported)
Posts: 6386
Joined: Tue Dec 04, 2001 10:06 am

Posting Rank

Re: Plastic Copy of Penis

Post by Dave (imported) »

try this web site:

http://www.dickblick.com/zz335/10/produ ... ig_id=2047

It seels a kit to do casting of various parts of the body. One kit is enough for a "hand" and that should definately do your penis.

Dave

;)
luvpain (imported)
Posts: 582
Joined: Sun Dec 02, 2001 2:12 pm

Posting Rank

Re: Plastic Copy of Penis

Post by luvpain (imported) »

I recalled seeing a kit to do just that, in a catalog I get. I went thru the recycle bin, and managed to find the catalog. They sell 2 kits for casting your penis and making a dildo out of it. One gives a peach tint, and the other a chocolate tint. They sell them for $115.00 US plus Shipping & handling. If you live in California you will need to pay sales tax also.

The site is www.goodvibes.com, I cannot give a direct link to the product, but have given you what menus will take you to the "Make You Own Dildo Kit"

Online Store: Toys: Dildos and Harnesses: Silicone Dildos

The site does not seem to have those annoying pop-up ads and links, but they will send you a catalog every month or two, which is discretely packaged.

Info from their site concerning the product

Just think -- you or a friend can be immortalized for future generations with this kit, which has everything you need to create a premium-grade silicone dildo cast from a penis! It's a fun erotic art project and bonding experience for a couple or two friends (the timing of creating the mold requires at least two people) -- and in the end, you'll have a high-quality, custom-made sex toy. This exclusive Good Vibrations kit contains enough material to make two casts (in case you don't get a good cast on your first try) and one dildo (either harnessable or without a base). Peach.

Note: The March 2002 issue of Playboy mentions that the kit makes two dildos. It actually makes only one dildo but it contains materials to cast two molds (in case you make a mistake on the first).

Care and Cleaning: Silicone products are non-porous and can be safely washed in the top rack of a dishwasher or sterilized by boiling for 1-2 minutes. You can also clean silicone with mild soap and water.
Andrew (imported)
Posts: 1787
Joined: Tue Nov 27, 2001 10:05 pm

Posting Rank

Re: Plastic Copy of Penis

Post by Andrew (imported) »

luvpain (imported) wrote: Mon Apr 08, 2002 9:42 am The site is www.goodvibes.com, I cannot give a direct link to the product, but have given you what menus will take you to the "Make You Own Dildo Kit"

Online Store: Toys: Dildos and Harnesses: Silicone Dildos

The site does not seem to have those annoying pop-up ads and links, but they will send you a catalog every month or two, which is discretely packaged.

Back when I was sexually active, needing at least one orgasm a day, I used several products from this company. They are indeed reliable and good and discreet. Perhaps a tad over-priced.

๐Ÿ“– ๐Ÿ“– ๐Ÿ“– ๐Ÿ“– ๐Ÿ“–
A-1 (imported)
Posts: 5593
Joined: Thu Nov 29, 2001 8:44 am

Posting Rank

Re: Plastic Copy of Penis

Post by A-1 (imported) »

This thread reminds me of the old Jim Croce song about "...five short minutes of lovin', done got me twenty long years in jail."

Part of the lyrics goes..."...she casted me in plaster while I sang her a song..."

It seems like I heard several stories about female groupies having plaster casts of the erect members of many legendary rock stars, including Jim Morrison of the Doors.

It is indeed a novel concept and one that I have not heard too much about lately.

Perhaps a letter to the editor of Rolling Stone is in order.

๐Ÿšฌ A-1๐Ÿšฌ
Paolo
Posts: 9709
Joined: Wed May 16, 2001 1:53 am

Posting Rank

Re: Plastic Copy of Penis

Post by Paolo »

Arghhh!

The link doesn't work! Maybe it's just down ...

Now, this technique sort of gives new meaning to the phrase, "Why don't you go and play 'hide & go fuck yourself?'"!

Just think of all the fun you could have!

๐Ÿ›ธ
luvpain (imported)
Posts: 582
Joined: Sun Dec 02, 2001 2:12 pm

Posting Rank

Re: Plastic Copy of Penis

Post by luvpain (imported) »

Opps, silly me. ๐Ÿ˜„

I forgot to double-check the link, after it posted. The message board appended the comma into the URL. I edited the post to fix the mistake.

But for lazy people that don't want to scroll back up here it is again:

www.goodvibes.com
Farrell_Squire (imported)
Posts: 128
Joined: Wed Nov 28, 2001 3:28 am

Posting Rank

Re: Plastic Copy of Penis

Post by Farrell_Squire (imported) »

Thanks for the replies. I'll post the links on my website and club.

Now I have a question. Suppos a man had occaisional penectomy fantasies. If he had a plaster cast of his penis and was able to make silicone dildoes from it anytime he wanted, would he be more likely to go through with the penectomy?

Farrell
luvpain (imported)
Posts: 582
Joined: Sun Dec 02, 2001 2:12 pm

Posting Rank

Re: Plastic Copy of Penis

Post by luvpain (imported) »

Well in my case, I don't think so, but I don't have any current desires to have my penis removed.

Although I do think making a dildo of your dick is a great Idea.

Now if someone says "F*** Yourself" you can say "OK", and produce a dildo being an exact replica of your dick! ๐Ÿ˜„

Or for those curious of heart they can see what it is like for their partner(s) during sex. ๐Ÿ˜Ž
wannabe_alto (imported)
Posts: 22
Joined: Sun Jul 03, 2005 12:56 pm

Posting Rank

Re: Plastic Copy of Penis

Post by wannabe_alto (imported) »

There is actually an exhibit coming to the Otario Science Centre here in Toronto opening this month, of von Hagen's plasticized casts of human bodies - skinned, nutted, etc.
SplitDik (imported)
Posts: 2264
Joined: Wed Jun 12, 2002 6:08 am

Posting Rank

Re: Plastic Copy of Penis

Post by SplitDik (imported) »

A-1 (imported) wrote: Mon Apr 08, 2002 10:31 am This thread reminds me of the old Jim Croce song about "...five short minutes of lovin', done got me twenty long years in jail."

Part of the lyrics goes..."...she casted me in plaster while I sang her a song..."

It seems like I heard several stories about female groupies having plaster casts of the erect members of many legendary rock stars, including Jim Morrison of the Doors.

It is indeed a novel concept and one that I have not heard too much about lately.

Perhaps a letter to the editor of Rolling Stone is in order.

๐Ÿšฌ A-1๐Ÿšฌ

Those groupies are called the "Plaster Casters" and got their start with Jimi Hendrix. Here's and interview with the founder: http://www.concertlivewire.com/interviews/cynthia.htm
koku (imported)
Posts: 21
Joined: Wed Oct 05, 2005 1:11 am

Posting Rank

Re: Plastic Copy of Penis

Post by koku (imported) »

I've actually DONE this. I was talking to a friend one nigth, bored off my ass. For some reason we got to talking about my cock, and before I knew it, I had promised to make her a copy of mine for X-mas. I had everything I needed already, so I started working right away.

Materials I used:

Plaster of Paris (residential grade, 8 min set): $9.00 for a 30 lb bag

An old paper cup, and some modelling clay (for the seal) (free?)

Mold Builder liquid latex: about $7.00

Vaseline: again, free (left-over from previous castings)

(do this in the bathtub with the stopper in, or on a trash bag laid out on the floor)

1 Cut out bottom of cup

2 mold clay around bottom of cup

3 SHAVE WELL

4 vasoline the hell out of that bugger

5 mix the plaster

6 cock in cup

7 plaster in cup with cock

8 wait until plaster is hard

9 pull out cock

10 pour mold builder into plaster casting, pour back out (you have to build it up in layers, unless you're using a curing rubber)

11 when you've got a decently thick (thick enough that you can pull it out without damaging the casting, pull the cock out of the plaster

12 fill/mount/paint as you please (the first one I made, I painted with black and red cow spots, and filled with beads, mounted onto a bicycle hand-grip)
richardeunuch (imported)
Posts: 1
Joined: Tue Oct 18, 2005 9:57 am

Posting Rank

Re: Plastic Copy of Penis

Post by richardeunuch (imported) »

Farrell_Squire

I have one of those Mold making things in it's box in one of my Closets. Some time over the next week I will dig through 20+ years of "Stuff" and see if I can find it. IF I can, I will give you the company Name, and any other info on the box.

O I tried to make a mold of my cock back then, It took 5/10 minutes as I rememberer, with out any movement. My Dick got soft, and the stuff slumped, ruining the mold. I did however make a Perfect mold of my right index finger, perfect down to Fingerprints.

[email protected]
Robby (imported)
Posts: 611
Joined: Tue Sep 03, 2002 2:22 pm

Posting Rank

Re: Plastic Copy of Penis

Post by Robby (imported) »

richardeunuch (imported) wrote: Tue Oct 18, 2005 9:57 am Farrell_Squire

I have one of those Mold making things in it's box in one of my Closets. Some time over the next week I will dig through 20+ years of "Stuff" and see if I can find it. IF I can, I will give you the company Name, and any other info on the box.

O I tried to make a mold of my cock back then, It took 5/10 minutes as I rememberer, with out any movement. My Dick got soft, and the stuff slumped, ruining the mold. I did however make a Perfect mold of my right index finger, perfect down to Fingerprints.

[email protected]

I tried something different to make a mold of my cock. While hard, I wrapped my penis with blue 3M masking tape, then I read some of the writings here on the Archive. Moments after reading some of the jokes, I was able to free myself from the blue tape and found the perfect mold of my dick.

Now all I need is Plaster of Paris (http://www.artmolds.com/ali/history_plaster.html) for that treasured keepsake. :dong:

But in all reality, I'd rather cast my dick in Plaster of Paris then capture the fiesty guy in Silicone (http://www.smooth-on.com/silicones.asp)...๐Ÿ˜„

โ›ต๐Ÿšถ๐Ÿšถโ›ต
nys12901 (imported)
Posts: 1
Joined: Mon Dec 03, 2012 1:38 pm

Posting Rank

Re: Plastic Copy of Penis

Post by nys12901 (imported) »

Robby (imported) wrote: Tue Oct 18, 2005 12:09 pm I tried something different to make a mold of my cock. While hard, I wrapped my penis with blue 3M masking tape, then I read some of the writings here on the Archive. Moments after reading some of the jokes, I was able to free myself from the blue tape and found the perfect mold of my dick.

Now all I need is Plaster of Paris (http://www.artmolds.com/ali/history_plaster.html) for that treasured keepsake. :dong:

But in all reality, I'd rather cast my dick in Plaster of Paris then capture the fiesty guy in Silicone (http://www.smooth-on.com/silicones.asp)...๐Ÿ˜„

โ›ต๐Ÿšถ๐Ÿšถโ›ต

Probably the best option is order a Clone a willy kit

Google it they are available in different places sex toys are sold
Sweetpickle (imported)
Posts: 603
Joined: Sat Jul 04, 2009 12:37 pm

Posting Rank

Re: Plastic Copy of Penis

Post by Sweetpickle (imported) »

Some years ago a friend made a mold of his penis and

then used it to cast handles for toothbrushes. He gave them

to friends for Christmas.
Riverwind (imported)
Posts: 7558
Joined: Sun Dec 30, 2001 5:58 am

Posting Rank

Re: Plastic Copy of Penis

Post by Riverwind (imported) »

Classic, :D

River
Dave (imported)
Posts: 6386
Joined: Tue Dec 04, 2001 10:06 am

Posting Rank

Re: Plastic Copy of Penis

Post by Dave (imported) »

Try googling "penis moid" or "clone a willy" on the internet.

There are companies that make kits that do what you want to do...
butterflyjack (imported)
Posts: 613
Joined: Sat Apr 10, 2010 11:33 am

Posting Rank

Re: Plastic Copy of Penis

Post by butterflyjack (imported) »

Hehehehe..Just what I always wanted...someone's dick in my hand early in the morning....In my mouth while brushing my teeth...Hmmmm wait a minute...Jackie
Paolo
Posts: 9709
Joined: Wed May 16, 2001 1:53 am

Posting Rank

Re: Plastic Copy of Penis

Post by Paolo »

Very classic.

2002.
Uncle Flo (imported)
Posts: 2512
Joined: Sun Aug 03, 2003 11:54 am

Posting Rank

Re: Plastic Copy of Penis

Post by Uncle Flo (imported) »

Yes, 2002 seems to have been a very good year. --FLO--
Post Reply